Posted on by Judy

A report about analyzing an ideal regenerative Rankine cycle with one open feedwater heater by using EES program

[ad_1]
Consider a steam power plant operating on the ideal regenerative Rankine cycle with one open feedwater heater . Steam enters the turbine at 20 MPa and 500°C and is condensed in the condenser at a pressure of 10 kPa. Some steam is extracted from the turbine, at the extraction pressure, and enters the open feedwater heater. Using the EES program : Investigate the effect of extraction pressure on the thermal efficiency of the cycle using a pressure range of 2 MPa. . Investigate the effect of extraction pressure on the second-law efficiency of the cycle. Heat is supplied to the steam in a furnace maintained at 800 K, and waste heat is rejected to the surroundings at 300 K.Determine the exergy destruction in the boiler, turbine and feed water heaters? Comment on the results.Repeat the same analysis (1 to 3) if the OFWH is replaced by a closed feed water heater . Note: All thermo-physical properties should be calculated as functions of the state pressure and temperature using the EES library.Assumptions, if any, should be mentioned clearly and justified in your report.Create parametric tables and plot efficiency versus extraction pressure.The report (word format) should include: schematic diagrams , T-s diagrams, thermodynamics analysis of the cycles, results and discussions, and conclusions.
[ad_2]Source link
 
“Looking for a Similar Assignment? Get Expert Help at an Amazing Discount!”

What Students Are Saying About Us

.......... Customer ID: 12*** | Rating: ⭐⭐⭐⭐⭐
"Honestly, I was afraid to send my paper to you, but splendidwritings.com proved they are a trustworthy service. My essay was done in less than a day, and I received a brilliant piece. I didn’t even believe it was my essay at first 🙂 Great job, thank you!"

.......... Customer ID: 14***| Rating: ⭐⭐⭐⭐⭐
"The company has some nice prices and good content. I ordered a term paper here and got a very good one. I'll keep ordering from this website."

"Order a Custom Paper on Similar Assignment! No Plagiarism! Enjoy 20% Discount"

Related posts:

  1. What are the most important characteristics of a program to consider when deciding what measurement tool to implement in a program evaluation? Why?
  2. As a program evaluator, how would you achieve maximum readability and potential for change when writing a program evaluation report? 1a. Defend your ideas. 2. Why is it so important to clearly explain the problem when writing the program evaluation report? 2b. How does this impact the way that results are received? 3. Explain why it is crucial to know the audience, mission, and outcomes of an organization when writing a program evaluation report. 4. Please provide examples of different types of audiences, along with the level of detail needed for the respective reports.
  3. Option 1 (30 points): Make a geology figure (like one you might find in a textbook) or a geologic model. The figure may be hand drawn or you may use a program like Photoshop or GIMP. The figure must take up a normal sized page and appear professional. You may not choose the rock cycle and there must be some artistic component. The model is open to your imagination bust must either be labeled or come with a paragraph explaining what the model shows.
  4. Scenario 3 – Product Liability Allan was not a licensed plumber, but often installed hot water heaters as part of his job as a handyman. Allan installed a new hot water heater manufactured by Bradford Inc. for Karla, a single mother with two children. Warnings were provided in large bold letters on a metal plate on the water heater. Similar warnings were provided in the manual Allan provided to Karla at the time of installation. The warning on the water heater read “CAUTION: HOT WATER CAN SCALD.” The heater itself contained a picture of hot water coming from a faucet with the words “DANGER” printed above it. In addition, the following statement was printed on the water heater. Warning! Water temperature over 120°F can cause severe burns. Children, elderly persons, and the disabled are at higher risk of being scalded. Test water temperature before bathing or showering. Temperature limiting valves are available, see manual. Allan set the temperature to 105°F. The next day, 3-year-old Simon was being bathed by his 12-year-old sister, Linda. When Linda received a text on her cell phone, she left Simon alone in the bathtub with the water running. Simon was scalded by the water from the tap. Simon’s mother brought suit against Allan and Bradford Inc. alleging defects in the design of the water heater and Allan’s failure to warn her about the heater’s dangers. Provide arguments that Allan, Bradford and Linda will introduce in court. Determine which party should win and support your answer.