Bullying

The first stages of the research writing process involve topic selection, formulation of a research question, preliminary research, and the development of a working thesis statement. Now you will begin identifying and evaluating sources to determine how effectively they can support your argument. If needed, the “Topic Ideas” web link below can be used for selecting your research topic.

For this task, you will create an annotated bibliography by finding 8-10 sources for your research paper, listing the sources in APA-formatted references, and providing an annotation for each source. Each annotation should offer a summary of the source, an evaluation of its author’s or publisher’s credibility, and an assessment of its relevance to your topic.

*********

A. Compose an appropriate, arguable thesis statement that previews two to four main points and that you plan to use in your research paper.

B. Create an annotated bibliography of eight to ten appropriate, credible sources that you plan to use in your research paper.

Note: You may use the attached “Annotated Bibliography Template” to complete your annotated bibliography, but use of the attached template is not required.

1. Provide a full, APA-formatted reference citation for the 8–10 sources.

2. Provide an annotation (suggested length of 150 words) for each of the 8–10 sources by doing the following:

a. Summarize the information presented in the source.

b. Analyze the credibility of the author of the source or of the publication (e.g. journal, publisher, or website), if no author is present.

c. Analyze the relevance of the source to your chosen research topic.

3. Write each annotation in your own words, without the excessive use of direct quotation or extensive paraphrasing, for the 8–10 sources from part B.

C. Demonstrate professional communication in the content and presentation of your submission.

What Students Are Saying About Us

.......... Customer ID: 12*** | Rating: ⭐⭐⭐⭐⭐
"Honestly, I was afraid to send my paper to you, but splendidwritings.com proved they are a trustworthy service. My essay was done in less than a day, and I received a brilliant piece. I didn’t even believe it was my essay at first 🙂 Great job, thank you!"

.......... Customer ID: 14***| Rating: ⭐⭐⭐⭐⭐
"The company has some nice prices and good content. I ordered a term paper here and got a very good one. I'll keep ordering from this website."

"Order a Custom Paper on Similar Assignment! No Plagiarism! Enjoy 20% Discount"

PA2_phd

Using the Internet, develop an APA paper that identifies:

How business can benefit from a well-managed database, BI, the Internet, and wireless technology.

Please provide examples of companies when possible and ensure that you justify your response. (PLEASE PROVIDE 1 COMPANY EXAMPLE OF EACH FACTOR. i.e. 1 example of a company which has benefitted from Business Intelligence (BI), 1 example of a company which has benefitted from the Internet and 1 example of a company which has benefitted from wireless technology). 10 peer-reviewed sources are necessary for the same.

What Students Are Saying About Us

.......... Customer ID: 12*** | Rating: ⭐⭐⭐⭐⭐
"Honestly, I was afraid to send my paper to you, but splendidwritings.com proved they are a trustworthy service. My essay was done in less than a day, and I received a brilliant piece. I didn’t even believe it was my essay at first 🙂 Great job, thank you!"

.......... Customer ID: 14***| Rating: ⭐⭐⭐⭐⭐
"The company has some nice prices and good content. I ordered a term paper here and got a very good one. I'll keep ordering from this website."

"Order a Custom Paper on Similar Assignment! No Plagiarism! Enjoy 20% Discount"

Analyzing Environmental Factors

overview:
According to Kotler and Armstrong (2018), marketing is “the process of engaging customers and building profitable customer relationships by creating value for customers and capturing value in return”.

For this week’s discussion, you will select a corporate brand and work together in a small group analyzing environmental factors that impact real-world marketing strategic decisions.

Discuss:
First, scan the listing of company brands identified in the discussion topics below. Separate discussion threads were created by your instructor for each of the brands. Select a thread with a brand you are interested in and work in small groups (4) of your peers. If a discussion thread already has 4 people, select another company brand to research and participate.

After selecting a company brand, review the associated case study in Strategic Marketing (Abratt & Bendixen, 2018) (Links to an external site.) accessed from the Hunt Library. Use the case study content as a starting point, but feel free to extend your environmental analysis beyond the case content.

Begin brainstorming microenvironment, macroenvironment, and global marketing environment factors that impact the brand. In your initial post, share 2-3 environmental forces (not already identified) and discuss how they affect marketing decisions.

What Students Are Saying About Us

.......... Customer ID: 12*** | Rating: ⭐⭐⭐⭐⭐
"Honestly, I was afraid to send my paper to you, but splendidwritings.com proved they are a trustworthy service. My essay was done in less than a day, and I received a brilliant piece. I didn’t even believe it was my essay at first 🙂 Great job, thank you!"

.......... Customer ID: 14***| Rating: ⭐⭐⭐⭐⭐
"The company has some nice prices and good content. I ordered a term paper here and got a very good one. I'll keep ordering from this website."

"Order a Custom Paper on Similar Assignment! No Plagiarism! Enjoy 20% Discount"

Assignment 4: Project Progress

Assignment 4: Project Progress
Due Week 10 and worth 100 points
Note: The assignments are a series of papers that are based on the same case, which is located in the XanEdu tab in the course shell. The assignments depend on one another. During the project life cycle, project risk reviews and reports are required as previously identified in the risk management plan. Two months after the project started, the following events have taken place:

1. The top two (2) threats have occurred.
2. The top opportunity has been realized.
3. The project’s risk budget is already exhausted.
4. The risk management schedule has been shortened by two (2) months.

Write a four to six (4-6) page paper in which you:

1. Analyze the impact of the events on the project.
2. Determine if any mitigation activities are required and explain why.
3. Determine if budget / schedule changes are necessary and explain why.
4. Update the risk register and highlight the changes made. Provide the justification for the changes.
5. Use at least four (4) quality resources in this assignment. Note: Wikipedia and similar websites do not qualify as quality resources.

Your assignment must follow these formatting requirements:
-Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides.
-Include a cover page containing the title of the assignment, the student’s name, the professor’s name, the course title, and the date. The cover page and the reference page are not included in the required assignment page length.

The specific course learning outcomes associated with this assignment are:
-Analyze the Critical Success Factors (CSF), project benefits, and organizational readiness and risk culture of the company.
-Assess and prioritize risks to the project through an analysis of the active threats and opportunities presented.
-Conduct a quantitative analysis of the project risks and opportunities, including the triggering events for each of the project risks.
-Develop an appropriate risk response plan for the project encompassing all of the identified risks, a communications strategy, and a process to add or remove risks, as the project progresses.

Click here to view the grading rubric for this assignment.
is due this week.

Prior Assignment #3 is ATTACHED this is a follow on assignment and it is about PROJECT MANAGEMENT, also the Grading Rubric has been attached and the Original British Petroleum Case Study is aso attached in case it is required to complete this assignment.

What Students Are Saying About Us

.......... Customer ID: 12*** | Rating: ⭐⭐⭐⭐⭐
"Honestly, I was afraid to send my paper to you, but splendidwritings.com proved they are a trustworthy service. My essay was done in less than a day, and I received a brilliant piece. I didn’t even believe it was my essay at first 🙂 Great job, thank you!"

.......... Customer ID: 14***| Rating: ⭐⭐⭐⭐⭐
"The company has some nice prices and good content. I ordered a term paper here and got a very good one. I'll keep ordering from this website."

"Order a Custom Paper on Similar Assignment! No Plagiarism! Enjoy 20% Discount"

PERSONAL STATEMENT

MSC Human Resource Management

PERSONAL STATEMENT REQUIREMENTS

Your personal statement will be used to assess your suitability for your chosen course. It must be between 300 and 500 words* and include:

•Why you have chosen this course (75-125 words)
•Why you would like to study online (75-125 words)
•How you plan to use this qualification in the future (75-125 words)
•Details of any relevant experience and skills (75-125 words)

*We suggest that you write your personal statement in a word processor to check its word count before submitting

 

What Students Are Saying About Us

.......... Customer ID: 12*** | Rating: ⭐⭐⭐⭐⭐
"Honestly, I was afraid to send my paper to you, but splendidwritings.com proved they are a trustworthy service. My essay was done in less than a day, and I received a brilliant piece. I didn’t even believe it was my essay at first 🙂 Great job, thank you!"

.......... Customer ID: 14***| Rating: ⭐⭐⭐⭐⭐
"The company has some nice prices and good content. I ordered a term paper here and got a very good one. I'll keep ordering from this website."

"Order a Custom Paper on Similar Assignment! No Plagiarism! Enjoy 20% Discount"

health care administration issue or barrier

Write a 1,250-1,500 word draft of your business research paper. Use your logic model to develop the sequence for your paper. Include:
Describe the health care administration issue or barrier you are addressing.

Discuss resources needed, including key stakeholders, and the role they play in your plan.

Identify any external or internal regulation that must be considered to ensure compliance with any legislative, institutional, or agency policy or expectation.

Describe the organizational and strategical development structures/processes that address the problem.

Present strategies for communicating your proposed plan

Use the research gathered in your literature review to provide support for paper.
Prepare this assignment according to the guidelines found in the APA Style Guide, located in the Student Success Center. An abstract is not required.
This assignment uses a rubric. Please review the rubric prior to beginning the assignment to become familiar with the expectations for successful completion.

What Students Are Saying About Us

.......... Customer ID: 12*** | Rating: ⭐⭐⭐⭐⭐
"Honestly, I was afraid to send my paper to you, but splendidwritings.com proved they are a trustworthy service. My essay was done in less than a day, and I received a brilliant piece. I didn’t even believe it was my essay at first 🙂 Great job, thank you!"

.......... Customer ID: 14***| Rating: ⭐⭐⭐⭐⭐
"The company has some nice prices and good content. I ordered a term paper here and got a very good one. I'll keep ordering from this website."

"Order a Custom Paper on Similar Assignment! No Plagiarism! Enjoy 20% Discount"

Reflection paper on the short movie smoke

watch the short movie smoke by Tom Smith , on social realism which looks into the effects of domestic violence and alcohol abuse in same sex relationship as she battles to live a normal life with her abusive lesbian partner Ashley .
Write a personal response to the film , do not reiterate the details from the film >
Reflect and process your personal reaction to the content .

What Students Are Saying About Us

.......... Customer ID: 12*** | Rating: ⭐⭐⭐⭐⭐
"Honestly, I was afraid to send my paper to you, but splendidwritings.com proved they are a trustworthy service. My essay was done in less than a day, and I received a brilliant piece. I didn’t even believe it was my essay at first 🙂 Great job, thank you!"

.......... Customer ID: 14***| Rating: ⭐⭐⭐⭐⭐
"The company has some nice prices and good content. I ordered a term paper here and got a very good one. I'll keep ordering from this website."

"Order a Custom Paper on Similar Assignment! No Plagiarism! Enjoy 20% Discount"

Systematic Evaluation

In working toward our final solution proposal, you have completed your problem identification, composed an annotated bibliography summarizing research which supports your solution, conducted a stakeholder analysis, and devised a solution plan with a for your problem. Remember, in order to persuade the pertinent stakeholders to implement your plan, you need a clear way to measure the effectiveness of your solution once it is implemented. This plan needs to provide a systematic evaluation of how you will measure the outcomes of your solution plan. See your module notes for guidelines on this section of your final solution proposal.

In APA format, compose a paper that:
• Presents a measurement plan to evaluate the effectiveness of your solution.

Module Notes:

In this module, you will be completing your measurement plan for your
final project. Solution planning and implementation can be costly, and
a clear plan that measures the effectiveness of a solution following
implementation is of utmost importance. There are some rules of
thumb when determining the effectiveness of a solution, and those
In this module, you will be completing your measurement plan for your
final project. Solution planning and implementation can be costly, and
a clear plan that measures the effectiveness of a solution following
implementation is of utmost importance. There are some rules of
thumb when determining the effectiveness of a solution, and those
rules must be followed.

1. The goals of your solution plan should align with the outcome
1. The goals of your solution plan should align with the outcome
variable you identified.
2. The criteria you are using to measure effectiveness must be clear
and defined succinctly.
3. A minimum acceptable level of performance should be set and
supported with research (how much change is enough to support
the solution).
4. Your measurement items must be measurable (ie. not abstract).
5. A measurement instrument should be determined for each of the
goals of the program.
6. A summary of overall effectiveness should be presented in a
graphic format that the reader can scan in a glance.

Strategies for Success
• Be sure your goals have been repeated, including the outcome
• variable your solution plan assesses.
• Exact variables that you are using to measure your plan’s
• effectiveness should be clear and concisely defined, with standards
• set that shows significant improvement.
• Remember that the variables of performance you are measuring
• must be measurable, and instruments to measure these variables
• must be identified.
• And lastly, create a graphic that will show your solution plan’s
• success in a glance.

Also, can you add graphs to give clarity in the paper?

What Students Are Saying About Us

.......... Customer ID: 12*** | Rating: ⭐⭐⭐⭐⭐
"Honestly, I was afraid to send my paper to you, but splendidwritings.com proved they are a trustworthy service. My essay was done in less than a day, and I received a brilliant piece. I didn’t even believe it was my essay at first 🙂 Great job, thank you!"

.......... Customer ID: 14***| Rating: ⭐⭐⭐⭐⭐
"The company has some nice prices and good content. I ordered a term paper here and got a very good one. I'll keep ordering from this website."

"Order a Custom Paper on Similar Assignment! No Plagiarism! Enjoy 20% Discount"

Module #3

Module #3 – (chapters 9,10,11,12,13) Due June 21st REVISED 5/15/20
Chapter 9 Assignment – Worksheet + chapter reflection + current event
1. Define modern environmentalism.
2. What must almost every new construction project in the U.S. include?
3. List three common spaces.
4. What agency is responsible for the regulation of pesticides in the U.S.?
5. The Earth is made up of what percentage of water and what percentage is fresh water?
6. Where is most fresh water located?
7. What gas is the cause of global warming?
8. Define greenhouse effect.
9. What was developed in an attempt to standardize air pollution reporting?
10. What was PSI renamed in 2000 by the EPA?
11. Define acid rain.
12. In what countries is acid rain a serious environmental problem?
13. List five indoor air pollutants.
14. Define Tropical Forest.
15. List three major potential costs of tropical deforestation as discussed by scientific and technical literature.
16. Define evapotranspiration.
17. What is the result of razing the tropical forests under the guise of farming or ranching?
18. What can replace subsistence farming as a source of income for dwellers of the rain forest?
19. What is the common name for the Comprehensive Environmental Response, Compensation, and Liability Act and what is its purpose?
20. Define environmental release.
Chapter 9 Answers – select the letter of the correct answer and include it and the question number in the assignment you submit
A. It is a serious environmental problem in Canada, Scandinavia, Japan, and Northeastern United States. B. Superfund, and was enacted to provide cleanup at sites where hazardous wastes had been
abandoned or previous hazardous waste disposal procedures had already contaminated the
environment.
C. The soil is thin in tropical forests and when the trees are removed the soil can wash away.
D. Severe changes in global weather patterns, loss of cultural and biotic diversity, and desertification of the forest lands.
E. Forests in humid, semiarid, and arid regions of the world. Forests ranging from moist (or closed) tropical forests to dry (or open) woodlands are generally included.
F. CO2
G. It is energy from the Sun heating the Earth’s surface. The surface then radiates the heat back in to space, but some of the heat is trapped in our atmosphere and warms the planet.
H. It is the accidental or deliberate release of a contained substance into the natural ecosystem (air, land, or water).
I. “Pollutant Standards Index (PSI).”
J. 71 percent water with only 3 percent of it as fresh water.
K. Eco-tourism
L. As ice and snow at the two poles.
M. Air Quality Index (AQI).
N. A term used to describe an information-based perspective supporting the need for harmony between industrial objectives and environmental goals.
O. It is a serious environmental problem resulting from the presence of sulfur oxides and nitrogen oxides in the atmosphere. When these compounds react with moisture they form dilute sulfuric and nitric acids, which are then carried back to Earth.
P. EPA
Q. It must include an environmental impact analysis.
R. The open ocean outside territorial sea limits of a country, the extraterrestrial space surrounding Earth, and the continent of Antarctica.
S. Carbon monoxide, radon, formaldehyde, asbestos, and passive tobacco smoke.
T. Water removed from the soil by evaporation from leaf and plant surfaces.
Chapter 10 Assignment – Worksheet + chapter reflection + current event
1. Define terrorism.
2. Define the Strategic Defense Initiative (SDI).
3. What type of military activity does the U.S. spend a higher percentage of its total research money on?
4. What is the main concept of a First Strike?
5. Define counter-force targeting.
6. Define counter-value targeting.
7. What is it called when both sides of a conflict have the capability to absorb a first strike and deliver a retaliatory second strike which will inflict an unacceptable level of damage?
8. Discuss compellance.
9. What is another name for swaggering?
10. Define SIOP.
11. Give two specific occurrences of mid-intensity conflicts.
12. List five general examples of low-intensity conflicts.
13. What are NBC munitions?
14. What is the primary goal of the Cooperative Threat Reduction Program?
15. What is NATO’s main purpose?
16. Describe what a cluster bomb unit consists of.
17. What is the name of the U.S.’s new version of the ABM, “Patriot Missile System” ?
18. Define chemical weapon.
19. Define biological weapon.
20. List six agents that have been identified by the CDC as posing a risk to our nation’s security.
21. List three dual-use chemicals and their dual purposes.
22. List three directed energy weapons.
23. Define cyberterrorism.
24. List three examples of military projects that were funded by the “black budget”.
25. What is the name of the treaty that was signed in the early 1990’s by President George Bush
Sr. and President Boris Yeltsin which made provisions to further reduce intercontinental
missiles?
Chapter 10 Answers – select the letter of the correct answer and include it and the question number in the assignment you submit
A. Thiodiglycol-Plastics, Phosphorus Oxychloride-Insecticides, Sodium Cyanide-Dyes and pigments
B. Operation Desert Storm & Afghanistan
C. Nuclear, biological, and chemical
D. They contain thousands of bomblets called bomb live units
E. Disruption of military information, as well as to the disruption of information in our homeland.
F. A weapon using poisonous, asphyxiating, or other gases affecting humans when they are either inhales or absorbed through the skin
G. Bacillus anthracis, Clostridium botulinum, Versinia pestis, Variola major, Francisella tularensis, Viral hemorrhagic fevers
H. Keep peace
I. START II
J. Border skirmishes, internal battles, police work, civil uprisings, and regional conflicts
K. Strategy which weapons are aimed at the military forces of opponent at strategic or nuclear forces
L. Hydrogen-Fluoride Chemical Laser, Space-based Free-Electron Laser, and the NPB
M. Stealth Bomber, Military Strategic Tactical and Relay System (MILSTAR), Advanced Cruise Missile
N. Ability and determination to use available technologies as tools of mass destruction
O. Program to explore the possibilities of strategic defense military
P. Prevent the widespread acquisition of NBC weapons.
Q. List of targets that U.S. long range nuclear forces would attack and assign weapons to target based on established damage, criteria, routing, and timing.
R. A weapon using a living organism, usually a pathogenic microorganism, for hostile purposes. Biological agents can be bacterial, fungal, viral, rickettsial, or protozoan.
S. Posturing
T. Nuclear attack so powerful to leave one’s country with forces inadequate to inflict damage on the Attacker.
U. Deployment of military power in order to get another nation to change its behavior to make it more satisfactory to aggressor.
V. Mutual Assured Destruction
W. Defense Related Research
X. Aim weapons at “softer” targets like urban population centers, industrial facilities and economic enterprises
Y. PAC-3®
Chapter 11 Assignment – Worksheet + chapter reflection + current event
1. Essayists typically take opposite stances on the effects of the growth in technology, one side says
that technology will cause our destruction while others say that technology_____________.
2. Why do people resist change?
3. List seven words that are less offensive referring to the process of change.
4. Social lag is usually brought on by a lack of what?
5. List an example of “the Good Old Days” related to “your” past.
6. Define information overload.
7. When a child learns the meaning of “in a few minutes” as opposed to “in a day or two” he/she has
reached the ability to determine a length of time Toffler calls what?
8. What is the name of a concept suggesting it is almost a status symbol in our society to be constantly
busy?
9. Define instant gratification.
10. Do most U.S. citizens feel that both science & technology have made their lives healthier & easier,
YES or NO?
11. What is a simple explanation for “Quality of Life”?
………………………………………………………………………………………………………………………………………………………………
The next six questions (12-17) relate to “response modes”.
12. This is an aspect of “blind faith” where an individual verbalizes implicit faith in the experts.
13. This is when people go along with changes for fear of what might happen to them if they resist.
14. This is when people are willing to openly protest the technologies that they oppose.
15. This is where people don’t want to be bothered with the boring or gory details.
16. This is an example where people will go to extremes to avoid change.
17. This is how most of us would like to respond to change, with agreement and harmony.
……………………………………………………………………………………………………………………………………………………………….
18. What is the name of a concept referring to humankinds’ dependence on any technological system
or device the either is not understood or cannot be controlled?
19. List the five elements of Technological Literacy.
20. List one “technology” that you “just cannot live without” (literally or metaphorically).
21. Describe what is meant by a “global technology community”.
22. Define a risk-benefit analysis.
23. What is the actual name of “mad cow disease”?
24. According to Figure 11-11, which activity or technology was rated as the riskiest by experts?
25. Define “technology accordance”.
Chapter 11 Answers – select the letter of the correct answer and include it and the question number in the assignment you submit (Note: questions 5 & 20 require you to “write in” your own answer.)
A. Reluctant acceptance
B. Lack of readiness
C. Bovine Spongiform Encephalitis (BSE)
D. Avoidance
E. Attempts to and must ultimately answer the question How safe is safe enough? Experts use historical accident and fatality records to reveal patterns of acceptable risk-benefit ratios. Generally, an acceptable risk for a new technology equates to the level of safety associated with ongoing activities providing similar benefits to society
F. Technology trap
G. Accord
H. Motor Vehicles
I. An individual’s inability to think clearly due to an excessive amount of cognitive stimulation
J. This social behavior or attitude refers to the extent to which a social group is able to recognize and take advantage of the patented benefits of a technological breakthrough and simultaneously control any of its negative side effects or risks
K. Knowledge, Awareness, Confidence and skill, Control, Insight
L. Apathy
M. Will cure all of society’s illnesses.
N. YES
O. Education, training, modification, orientation, guidance, indoctrination, and therapy
P. Immediate acquiescence
Q. The word change produces emotional reaction, since it is not a neutral word. To many people, change is threatening. Without any sort of modifier the word change promises no respect for present cultural values. Change may even disrupt the values.
R. The degree to which you enjoy life and the possibilities it holds for you
S. It is characterized by a concept labeled universalism. The world is an open system heavily reliant on international network of technology transfer
T. The conscious expenditure off effort to make the time interval between wanting something and getting it as short as possible – the ability to “have it all” in a fast pace, high-tech society
U. Durational expectancies
V. Busyness Syndrome
W. Reactionist rejection
Chapter 12 Assignment – Worksheet + chapter reflection + current event
1. List four examples of “social institutions”.
2. Explain what is meant by “family dinner” and indicate if you have or do experience them.
3. What is different between a “family” and a “household”?
4. According to 2000 census data, nuclear families make up what percentage of households in the U.S.?
5. According to the book, has childhood become more or less complicated?
6. List an example of how a “labor-saving” device can make tasks more difficult rather than easier.
7. Based on an average from the 2000’s do Americans work more or less than their Western European
counterparts?
8. The Vatican document “Instruction on Respect for Human life in its Origin and on the Dignity of
Procreation – Replies to Certain Questions of the Day” instructed governments around the world to
ban what certain things?
9. Science vs. Religion, what do scientists say according to the book?
10. Science vs. Religion, what do religious leaders say according to the book?
11. Why do schools exist?
12. Why is it important to be a “lifelong learner”?
13. What name is given to a computer program that reduces a large amount of information into a form
of question-and-answer routines that would lead a learner through a logical progression to the
correct response?
14. List two leisure time activities that you enjoy.
15. What two terms, coined in the 1980’s, refer to using the remote control of a television to keep from
watching commercials, and are you guilty of doing this?
16. What can a TV network do to counteract what is done in question 15?
17. What is meant by “industrial recreation”?
18. What technology can be used to improve the performance of duffers, hackers, & tournament
players alike?
19. What is the name of the DuPont fiber that has the feel of cotton with a wicking ability that pulls
moisture away from the body?
20. Complete the leisure time check list (5 items). Check the activities that you have been known to do
“all at the same time”.
___ instant message ___watch TV ___talk on a cell phone
___surf the internet ___listen to music
Chapter 12 Answers – select the letter of the correct answer and include it and the question number in the assignment you submit (Note: questions 14 & 20 require you to “write in” your own answer. Questions 2 & 15 prompts you to include additional information along with an answer from below)
A. Industrial recreation services can cement employee loyalty to the company, reduce tensions, lower absenteeism, and promote employee camaraderie and morale. Many companies offer some type of recreation activities as a component of their employee benefits package. Some of the industrial activities are basketball, racquetball tennis, weight lifting equipment, stationary bicycles, fitness classes etc
B. Expert system
C. Scientists believe religion skews objective reasoning, fuels repressive movements, and stifles freedom of thought
D. Thermax
E. Americans work more than Western European counterparts
F. It’s important because technology, job market, political environment, etc are changing and constantly evolving
G. Computers, high-speed video cameras, and heart monitors
H. Schools exist to educate and socialize the residents of a community, state, nation, or continent
I. More complicated.
J. Religious leaders are convinced science pursued from an agnostic or atheistic base will continue to feed the ever-growing materialism in society and contribute to the violence of the modern age
K. Family, colleges, churches, health clubs
L. Family is two or more people living together who are related by blood, marriage, or adoption. Household is one or more people who occupy a house, apartment, or other residential unit that is not group quarters
M. Food processors; “since all of the individual components must be cleaned separately, its laborsaving profile is best observed when large quantities of ingredients must be prepared
N. Artificial procreation including sperm banks, embryo banks, postmortem insemination, and surrogate motherhood
O. Some companies have taken to imbedding advertisements directly in network programs to counteract these consumer tendencies
P. It is the gathering of children and parents to eat an evening family meal and is one of the primary ways in which growing children learn about conventional behaviors they need to be in touch with as adults.” As a growing child, I have had many unforgettable family diners, however in recent years family diners have been reduced to almost none because of the busy life that we all live.
Q. 25 percent.
R. Zapping and Zipping
Chapter 13 Assignment – Worksheet + chapter reflection + current event
1. What is the purpose of a technology assessment?
2. Which of the three types of research is most likely to utilize findings of pervious research and is
directed toward the full-scale production of useful materials, devices, systems, or methods?
3. Describe “data mining”.
4. Define “biometrics”.
5. Define “heuristics”.
6. List four examples of engineering ethics.
7. Define “risk assessment”.
8. Identify the three phases of cause & effect relationships that the book explains.
9. What is the problem with using an animal to determine the toxicity of a chemical to humans?
10. Define what a future wheel projection technique is.
11. Define what a content analysis is used for.
12. What type of study uses a group of experts and an intermediary to make long-range forecasts of
technological and societal developments?
Chapter 13 Answers – select the letter of the correct answer and include it and the question number in the assignment you submit
A. a) Laboratory animals are commonly exposed to high concentrations of chemicals to ensure that if
there are any toxic effects, they will be evident at statistically significant levels.
b) The initial use of high doses of toxic substances may interrupt the recipient’s internal
metabolic reactions toward the initiation of carcinogenesis.
c) Animals and humans metabolize substances differently.
B. It is a small-group brainstorming session in which the participants examine the consequences of a
particular social trend or a technological event.
C. Delphi study.
D. Integrity, Honesty, Candor, Civic-mindedness.
E. To make projections about the future state specific technologies, so we can assess and plan for their impacts on society.
F. (1) Risk assessors must be able to determine how potential threats are released into and move
through the ever-changing environment.
(2) They must figure out how much of the substance people might eat, breathe, or swallow and
then estimate how much of it they could ultimately absorb.
(3) Phase three entails a determination of how much of a hazard the absorbed substance poses
(whether it will cause symptoms such as acute nausea or chronic loss of hearing).”
G. A method of studying the risk of a new technology, material, or device so they may be better avoided, reduced, or otherwise managed.
H. Reviewers keep track of events as they occur, to make an accurate projection of major trends one to two years down the road.
I. Development.
J. It involves technologies allowing us to be identified by specific biological traits. It’s used for face
recognition, iris recognition, fingerprint recognition, voice recognition, and dynamic signature
recognition.
K. Also called knowledge discovery in databases (KDD), is based on elaborate pattern recognition
algorithms. Exciting applications are projected in many fields, including automobile maintenance,
astronomy, geology, medicine, quality assurance, and military intelligence.
L. Rules of thumb based on a compilation of personal experiences over time. They are used to help
guide problem solving exercises. In the field of artificial intelligence, they are built into computer
programs to enable machines to make educated guesses. Unlike algorithms (mathematical
computation), they do not guarantee a solution.

What Students Are Saying About Us

.......... Customer ID: 12*** | Rating: ⭐⭐⭐⭐⭐
"Honestly, I was afraid to send my paper to you, but splendidwritings.com proved they are a trustworthy service. My essay was done in less than a day, and I received a brilliant piece. I didn’t even believe it was my essay at first 🙂 Great job, thank you!"

.......... Customer ID: 14***| Rating: ⭐⭐⭐⭐⭐
"The company has some nice prices and good content. I ordered a term paper here and got a very good one. I'll keep ordering from this website."

"Order a Custom Paper on Similar Assignment! No Plagiarism! Enjoy 20% Discount"

Module #2

Module #2 – (chapters 5,6,7,8) Due June 14th REVISED 5/15/20
Chapter 5 Assignment – Worksheet + chapter reflection + current event
1. List six technological breakthroughs in medicine that have been made over the past few decades.
2. List three new diagnostic systems for studying the interior features of the body.
3. Between what time periods were the “baby boomers” born?
4. Which medical care option is a payment scheme in which the hospital receives a fixed fee reflecting an average cost of curing a patient’s condition?
5. What type of medical care was standard practice when health insurance was introduced in the middle of the twentieth century?
6. What care plan is in actuality a merger of an insurer and a provider of health care?
7. What is the name of an organization that includes hospitals and physicians offering their services at a fixed price in exchange for a guaranteed supply of patients?
8. Define pharmacogenomics.
9. List 6 examples of doctors attempting to produce bionic bodies.
10. What is the purpose of balloon angioplasty?
11. What types of equipment (technology) are used in minimally invasive surgery?
12. List three medical areas where hysteroscopic laser is commonly used.
13. What is a lithotripter used for?
14. What is the name of a recently FDA approved robotic surgical system?
15. What is the name of the procedure in which an egg from a woman’s ovary is fertilized outside of her body by the father’s sperm in a laboratory dish and then is re-implanted in the woman’s uterus.
16. Describe the two variations of surrogate motherhood.
17. How is embryo transfer different from surrogate motherhood?
18. Explain the details of cryo-preservation.
19. Define Amniocentesis.
20. Define Ultrasound.
21. Define Fetoscopy.
22. What ancient society was one of the first to use self-diagnosis?
23. List 2 do-it-yourself home health-testing devices that could be purchased at the local convenience store.
24. Define what a living will is.
25. What was the first legislation to recognize the living will and when was it passed?
Chapter 5 Answers – select the letter of the correct answer and include it and the question number in the assignment you submit
A. Replacing the human heart, pancreas, kidneys, limbs, blood vessels, and hip joints.
B. Mid 1940s-and Mid 1960s
C. Employing endoscopic devices, laser beams, or shock waves, robotics
D. Health Maintenance Organizations (HMO’S)
E. Urology, Pulmonary medicine, and gastroenterology
F. Heart-Lung machines, Artificial joint replacements, Artificial heart valves, Brain pacemakers, Robotic surgical assistants, Cardiac pacemakers
G. It fragments kidney stones inside the body.
H. In Vitro Fertilization (IVF)
I. Preferred Provider Organization (PPO)
J. Embryo transfer is another reproduction-assisting technology that has become available to couples who are unable to conceive a child on their own. This technology may be employed for women who cannot produce eggs, but can carry a fetus to term. The couple pays a fee to a fertile woman who agrees to be inseminated with the man’s sperm. It is critical for this egg donor to be matched with the woman, in terms of their ovulation cycles.
K. Procedure using sound waves directed into the abdomen of the pregnant woman. “Pulse Echo” sonography gives the image.
L. Diagnosis-Related Group
M. Fiber-optic technology enabling the doctor to study the fetus inside the uterus.
N. Ancient Egypt
O. It is one of three standard medical inventions for coronary artery disease; can sometimes replace coronary bypass surgery to open clogged arteries.
P. P. Test for high cholesterol levels, Home-pregnancy test
Q. Computerized Axial Tomography (CAT), Use of endoscopic Instruments, Nuclear Magnetic Resonance
(NMR)
R. A formal written declaration by a competent adult stating a wish or expectation that if he or she becomes mentally or physically ill that there is no prospect of recovery, and procedures designated to prolong life should be withheld.
S. 1) When an infertile woman and man enter a contractual agreement with another woman. The surrogate agrees to artificially inseminated with the father sperm. After carrying the resulting fetus to term, the surrogate mother is expected to return the child to the original couple. In this case the baby has the genetic characteristics of the father and the surrogate mother.
2) Another variation of surrogate motherhood arises when the female partner is not infertile,
but incapable of carrying a fetus to term. In this case, an egg from the woman is fertilized with a
man sperm in vitro, and the resulting embryo is implanted in the surrogate mother uterus.
T. The natural death act in California in the mid 1970s.
U. fee-for-service
V. A long, thin needle attached to a syringe is inserted through the lower wall of the pregnant woman’s abdomen. The amniotic fluid, which contains some live body cells shed by the fetus, is withdrawn.
W. A young couple has eggs fertilized and cooled to -321 degrees Fahrenheit, by doing this they are preserving the fertilized eggs to be used at another time.
X. daVinci
Y. New Science in the field of medicine combining knowledge of a person’s genome with what is being done in the pharmaceutical industry, the notion that one drug is fits all people is being supplemented by theories suggesting we can manufacture drugs more accurately suited to a person’s genetic makeup.
Chapter 6 Assignment – Worksheet + chapter reflection + current event
1. What umbrella acronym is used to name a host of automation technologies used in manufacturing?
2. What country was lean manufacturing developed?
3. How is concurrent engineering different from the traditional linear approach?
4. What is the main purpose of DFMA?
5. Define JIT.
6. Which system, CIM or CAM, allows for computers all over a manufacturing plane to communicate with each other?
7. What acronym is given to the computerized drawing of parts?
8. What is another name for a numerically controlled machine?
9. List one tangible benefit that has been reported among CIM users.
10. What is the difference between lean manufacturing and agile manufacturing?
11. How does supply chain management work?
12. What is the purpose of a kanban card or ticket?
13. What is bar coding used for in manufacturing?
14. What is the name of the most commonly used bar coding symbology?
15. What is the purpose of MRP?
16. What is MRP II?
17. What is the name of the machining centers, that “soft” custom manufacturing uses, that can produce a variety of parts by a simple change of software?
18. List 5 commercially available rapid prototyping systems.
19. What type of manufacturing groups machines together rather than placing them on and assembly line?
20. What layout technology is used to achieve cellular manufacturing?
21. What does TQM stand for?
22. What type of quality assurance is based on prevention-oriented rather than inspection-driven?
23. What is the name of a technique that has recently been developed and is a systematic way for a manufacturing firm to identify customer requirements and convert them into design and manufacturing needs?
24. What does ISO 9000 certification indicate about a company?
25. Who is often referred to as the father of robotics?
Chapter 6 Answers – select the letter of the correct answer and include it and the question number in the assignment you submit
A. QFD
B. Cellular manufacturing
C. Lean manufacturers see themselves in partnerships with their suppliers, and they generally cultivate long-term relationships with suppliers to ensure quality. Agile manufacturers focus on the customer and meeting the customer’s needs.
D. A dominant application software structure being used by manufacturing managers
E. Most widely accepted automatic identification technology used to control and drive complex conveyor systems
F. It indicates that a company meets international quality standards.
G. Japan
H. GT
I. Joseph Engleberger
J. SPC
K. Total quality management
L. Used for planning future purchase orders and manufacturing lots according to what is required to complete a master production schedule
M. 1) laser modeling systems, 2) solid ground curing, 3) fused deposition modeling, 4) fast casting, 5) laminated object manufacturing
N. CE contrasts with the traditional linear approach, in which marketing experts conceptualize the product, design engineers design the prototype, and the manufacturing and purchasing departments make all the decisions regarding the production process and parts suppliers.
O. FMS
P. CIM
Q. CIM
R. CAM
S. Product simplification
T. A manufacturing philosophy attempting to eliminate waste throughout the system, including inventory at both ends of production and all machinery and man-power not adding value directly to the product
U. UPC
V. Lower energy bills, Reduction in the duplication of data entry, Fewer discrepancies in the
data collected, Less scrap and rework problems
W. Used in place of job orders and routing sheets and emphasizes small lot sizes
X. CAD
Y. Companies today, in their quests to be lean and agile, are specializing as never before. As
specialization increases there is more dependence on external supplies or the outsourcing of an
increased percent of manufactured components. Since other companies are now supplying critical
components, a manufacturer becomes dependent on these external suppliers for the overall quality
of the product. Part of supply chain management includes the certification of suppliers who then are
considered part of the product team.
Chapter 7 Assignment – Worksheet + chapter reflection + current event
1. Define technology transfer.
2. List four generic elements that may be used to examine a majority of the activities of technology transfer.
3. Describe how foreign direct investment works in relation to technology transfer.
4. What is a turnkey plant?
5. What is involved in a licensing agreement?
6. Define entrepreneurial science.
7. Define reverse engineering.
8. What is meant by informal channels of technology transfer?
9. What is meant by a technology gap?
10. What five industries are identified by the OECD as high technology?
11. What is the most commonly referenced statistic used to measure the development of a country?
12. Define appropriate technology.
13. What are maquiladoras?
14. Discuss imitation lag.
15. Discuss demand lag.
16. What countries did the PRC rely on for technology transfer in the 1950’s and then in the1960s?
17. What was India’s political position during the cold war?
18. What is/was the general feeling of the U.S. about selling technology to communist countries?
19. In what two areas has the Russian Federation begun to utilize its competitive prowess?
20. Through the 1980’s, the Indian government emphasized its preference for technology transfer investments in what forms?
Chapter 7 Answers – select the letter of the correct answer and include it and the question number in the assignment you submit
A. The acquisition of technology by certain nations and then other nations that lag technically
B. Aerospace, computers, office machinery, electronics-communications, pharmaceuticals
C. A formal channel for the transfer of technology tied to a legal agreement between parties. The purchaser of the license normally pays royalties to the party or parties who have ownership of the technology in demand
D. A foreign owned and operated assembly plant, most often along the U.S.- Mexico border, that imports components into Mexico, assembles them into products ranging from TV’s to auto parts, and re-exports finished products
E. GNP
F. Its political position during the Cold War was to remain independent.
G. First the Soviet Union and then in the 1960’s China relied more on Japan and Western Europe
H. This refers to when a nation has no interest or does not accept an imported technology
I. When the recipient nation is slow in replicating and developing their own counterpart of a technology they received
J. 1. What is being transferred
2. Who is technology donor,
3. Who is technology recipient
4. Type of technology transfer channel.
K. The US felt that selling technology to communist countries was actually in opposition to keeping the USA the leader not just of technology but, even of the free world since it would be akin to empowering the enemy
L. Energy & defense supplies
M. A trend especially apparent in university research laboratories in which there is a convergence between basic and applied research, such that commercial opportunities emerge
N. Involve extensive contact between government reps., tours of industrial plants, and the establishment of domestic training and educational programs
O. Appropriate technology refers to technology that involves and meets the needs of the local
community that it will be used in without adversely affecting the local population
P. Transfer investments and in sales or licensing of technology
Q. An astute capacity to carefully disassemble an impacted device, examine it, and eventually copy it
R. Technology donor constructs a fully operation production plant for recipient nation. Easy to initiate production process.
S. It is primary channel for transfer of technology. You have oversea subsidiaries to reduce distribution
costs; they can avoid high labor costs and import duties.
T. Development of a technology product or process in one setting then is transferred for use in
another setting.
Chapter 8 Assignment – Worksheet + chapter reflection + current event
1. What are three ways of evaluating the appropriateness of technology?
2. Define Appropriate Technology.
3. Define Renewable Energy.
4. List seven forms of Renewable Energy.
5. Define Biomass energy.
6. Currently, what percentage of the electricity produced in the U.S. is produced by hydropower?
7. Which country has the highest percentage of power generated from geothermal sources?
8. Who leads the world in wind power?
9. List three methods, which have been reviewed seriously, for extracting energy from the sea.
10. What unique property do semiconductors have?
11. Where was the thermal solar power project, called Solar One, constructed?
12. Define smart growth.
13. Define new urbanism.
14. What is the “smartest” U.S. City, in terms of development?
15. What are the main considerations of a green building?
16. What is the problem of making a house too air tight?
17. List two materials that are considered Low Impact Materials.
18. What are the three broad goals of sustainable agriculture?
19. What are the main differences of integrated pest management as opposed to traditional pest control?
20. Define agroecology.
21. Define ethnobotany.
22. What is the focus of ISO 14000?
23. Define technology equity.
Chapter 8 Answers – select the letter of the correct answer and include it and the question number in the assignment you submit
A. Straw bales, rammed earth.
B. An approach to agriculture promoting sustainability and linking ecology, socioeconomics, and culture to the design of agricultural systems.
C. Technical, Cultural, and economic
D. It can lead to increase air pollution inside the structure.
E. Germany.
F. An initiative that emerged from the scientific field studying how people from a particular culture use indigenous plants.
G. An intermediate level of technology development, as opposed to one too sophisticated or complex for the problem in question. A.T. is also an attitude regarding an overreliance on high technology. It refers to technology that fits the cultural situation for which it is proposed without causing more problem than it solves.
H. Development accommodating the needs of a community without sacrificing the environment. It aims to balance development and environmental protection by creating new developments that are centered more in the towns and cities, include alternative transit options, and have mixed use development.
I. Portland, Oregon.
J. Farm profitability, improvement of the environment, and increased quality of life for farmers and their communities.
K. Managing environmental issues through appropriate business strategies.
L. In the Mojave Desert, by SCE.
M. It attempts to use ecologically sound, non-pesticide methods to reduce and manage pests. Does not attempt to eliminate all pests; rather it manages them to keep pests at an acceptable level. Although some farmers use pesticides with this, but the goal is to use pesticides targeting a specific pest instead of generic pesticides that commonly kill a range of fests. Farmers using this method also rely on biological controls, such as using other insects that feed on the unwanted pests.
N. Sources of energy that are always available because, in reality, they cannot run out, and they can be replenish.
O. A building constructed in a way that minimizes wastes and includes recycled, renewable, and reused resources to the maximum extent possible. Construction of green buildings include: energy efficiency, renewable resources, water conservation, and waste minimization.
P. Wave power, ocean thermal energy conversion, and tidal power.
Q. An issue implying that all technologies are available to and used by all socioeconomic segments in a
society.
R. 7 percent.
S. Energy supplied from the organic materials.
T. They have the unique property of being able to turn sunlight directly into electric current.
U. The movement of middle and upper class people living in the suburbs into town, where they typically purchase or rent space in what are called infill developments.
V. United States.
W. Biomass, Hydropower, Geothermal, Wind, Ocean, PV Cells, and Thermal Solar Power.

What Students Are Saying About Us

.......... Customer ID: 12*** | Rating: ⭐⭐⭐⭐⭐
"Honestly, I was afraid to send my paper to you, but splendidwritings.com proved they are a trustworthy service. My essay was done in less than a day, and I received a brilliant piece. I didn’t even believe it was my essay at first 🙂 Great job, thank you!"

.......... Customer ID: 14***| Rating: ⭐⭐⭐⭐⭐
"The company has some nice prices and good content. I ordered a term paper here and got a very good one. I'll keep ordering from this website."

"Order a Custom Paper on Similar Assignment! No Plagiarism! Enjoy 20% Discount"